Invisible downtime
Every stop is recorded with its duration and reason.
Marvex Nexus
Your plant, on one screen.
Machines, maintenance, production and energy.
Marvex Nexus reads plant data and brings machines, production, maintenance, energy and actionable savings together.
- Read-only; never sends commands
- Every value shows its source
- Small workshop to large plant
Live plant view24 machines running
101-MD01Running101-SR01Running101-BH01Maintenance · 3 days101-BC07Running
Panel connectionES03-N08-RIO-U01
-FS01 · DO11 · B06Demo plant · values are simulated
A plant loses money in three places.
Missed maintenance
Nexus opens maintenance on time and keeps the work traceable.
Wasted energy
See where energy went and what each action would save.
Platform
What is inside Nexus
One data foundation, one screen. Start with what you need.
Live 3D plant
Tap a machine for condition, history and its exact panel, station, module and channel.
Open in demo →Live 3D plantOpen the real product screen in the live demoDemo plant · values simulated
Plant board
Live machine status, condition, output and maintenance on wall screen or phone.
Open in demo →Plant boardOpen the real product screen in the live demoDemo plant · values simulated
MaintenanceOpen the real product screen in the live demoDemo plant · values simulated
Downtime and alertsOpen the real product screen in the live demoDemo plant · values simulated
Efficiency and adviceOpen the real product screen in the live demoDemo plant · values simulated
ReportsOpen the real product screen in the live demoDemo plant · values simulated
Additional modulesOpen the real product screen in the live demoDemo plant · values simulated
Live 3D plant
Tap a machine. See its panel, module and channel.
Tap the machine for status, history and the exact panel, station, module and channel.
ES03-N08-RIO-U01 · -FS01 · DO11 · B06 · N08.1.2.12.6ES03-N08-RIO-U01
CI801DI01DI02AI01DO10DO11 · B06DO12
No model? We scan up to about 9,300 m² with LiDAR.
The same Nexus, from workshop to plant.
Packaging workshop
Machine tracking and maintenance.
Open demo →Recycling plant
Recovered tons, kWh and avoided CO2.
Open demo →Steel plant
Energy by ton, peak and load shifting.
Open demo →Cement plant
Read-only controls, 3D, lab and ships.
Open demo →Demo plants · values are simulated.
Everyone sees their work.
Owner: summary and gains
Maintenance: plan and Pareto
Production: report and stops
Energy: kWh/t and peaks
Technician: panel and address
Quality: samples and cost
Start small and grow as needed.
- 1
Explore or request analysis
Start without installation.
- 2
Connect Nexus
Read-only controls or wireless readers.
- 3
Connect ERP
Transfer agreed data.
- 4
Add modules
3D, lab, quality and ships.
Method
It breaks the bill into its parts.
Nexus classifies every energy interval by what the machine was doing.
64%8%6%3%4%15%
Your own best
Your plant is its own benchmark.
Four reasons for change
Product mix, operation, no-product energy and fixed load.
Two estimates, the lower one
The lower estimate is reported with confidence.
Switch off or keep running?
Start energy and break-even are learned.
Cost by product
Allocated cost reconciles to the bill.
Early power-factor warning
Reactive drift is flagged early.
Nexus does not claim uncertain savings.
A US patent application has been filed for the Nexus calculation method.
Start with the data you have.
Level 0 · Meter only
Standby, starts, quality and peak.
Level 1 · + Machine signals
Idle motors and switch-off advice.
Level 2 · + Production
Ledger, causes, settings and product cost.
No control system? We bring the readers.
Wireless readers send encrypted outbound data through an on-site gateway. No command goes to the machine.
Okuyucular→Merkez cihaz→Marvex→Nexus
Current reader
Clamps around one phase and estimates runtime, load and energy.
Condition sensor
Vibration, temperature and speed against ISO 20816.
Gateway
IP65 with Ethernet, Wi-Fi or 4G.
Reader illustrations are representative.
Security and honest data
Nexus reads. It never controls.
Advice stays on screen; you decide.
Security details →No commands
Never writes to controls.
Visible source
Every value is labeled.
Audit trail
Who and when are recorded.
Role access
Encrypted in transit and at rest.
Selecting our first pilot plants.
We are installing Nexus with selected plants and measuring results together.
Frequently asked questions
Is Nexus energy software?+
Energy is one part; Nexus also monitors machines, maintenance, downtime and reports.
For small workshops?+
Yes; open the packaging demo.
Is anything installed?+
Not for the free analysis. Existing controls are read-only; wireless readers are optional.
Can Nexus control machines?+
No. It only reads.
Does it connect to ERP?+
Agreed production and work-order data can be transferred.
Pricing?+
Scope is defined for each plant during the pilot.
See your plant on one screen.
Open the demo or tell us about your plant.